Subscribe to our RSS Feeds
Bleh. I hate blogs. But my friend asked me to build a nice machine for him and he hinted it be multi media capable. And one of my other friends joked about blogging about it because he's interested in how it comes along since he never built a MM machine yet. My first blog, maybe my last. At least it's not twitter (by the way, people that used twitter aren't tweeters, they're twits). So here goes.

Power Supply

0 Comments »
A stock nameless white label power supply comes with the case, but that's not good enough. It's fine for initial building, but if we're going to load this machine with a new 6 Core CPU and 2 extra video cards, and 4 GB of RAM then we need to up the quality of the power supply. We'll just throw the old PSU up on Ebay for $10.

So we're going to upgrade to a Cooler Master 550W power supply. The stats:

  • Features:
    • Compliance with the newest Intel standard ATX 12V V2.3
    • Support dual +12V1 and +12V2 outputs for higher power usage
    • 6x SATA Connector
    • High reliability (MTBF > 100,000 hours)
    • Protection design (OVP/OCP/OPP/SCP)
    • More than 70% better efficiency at typical load operation
    • 2x 6+2Pin PCI-Express Connector
  • Total Outpur: 550 W
  • Input Voltage (Regular): 110~115 V / 220~230 V
  • Input Current: 6.3A @230Vac / 8A @115Vac
  • Input Frequency Range: 47~63 Hz
  • Output: +3.3V Max 25A; +5V Max 25A; +12V1 Max 16A; +12V2 Max 16A; -5V Max 0.8A; -12V Max 0.8A; +5Vsb Max 2.5A
  • Fan: Sleeve bearing 120mm fan
  • Power Good Signal: 100~500 ms
  • Hold Up Time: >17 ms
  • MTBF: >100,000 hours
  • Protection: OVP/ OPP/ Short Circuit Protection
  • Connectors: 1x 20+4 pin Motherboard Connector; 1x 4+4pin 12V CPU Connector; 2x 6+2pin PCI-Express Connectors; 6x SATA Connectors; 3x 4pin Peripheral Connectors; 1x 4pin Floppy Connectors

0 Responses to "Power Supply"

Post a Comment